Looking for Floorboards
Thread Starter
|
Elite HDF Member
Joined: Aug 2006
Posts: 3,759
Likes: 1
From: Republic of Texas
Looking for Floorboards
'04 FXD
Seen several posts about floorboards here. I'm looking for boards where the tops are about where the forward mounted pegs are and extend backwards. Most of the kits I see have mounts in the middle of the board and extend equally forward and back. The forward peg position is almost a full stretch for me, so I'm looking to be able to bring my feet back a bit when not shifting/braking.
I'm not sure if these exist or how the rear of the board would attach, but I'm open to suggestions if anyone knows of any.
Thanks in advance!
Seen several posts about floorboards here. I'm looking for boards where the tops are about where the forward mounted pegs are and extend backwards. Most of the kits I see have mounts in the middle of the board and extend equally forward and back. The forward peg position is almost a full stretch for me, so I'm looking to be able to bring my feet back a bit when not shifting/braking.
I'm not sure if these exist or how the rear of the board would attach, but I'm open to suggestions if anyone knows of any.
Thanks in advance!
Scott you might try something like this
http://www.jpcycles.com/product/531-750
http://www.cycleaffectz.com/product/27-0920
http://www.ebay.com/itm/COMPLETE-FLO...87334a&vxp=mtr
http://www.jpcycles.com/product/531-750
http://www.cycleaffectz.com/product/27-0920
http://www.ebay.com/itm/COMPLETE-FLO...87334a&vxp=mtr
Thread Starter
|
Elite HDF Member
Joined: Aug 2006
Posts: 3,759
Likes: 1
From: Republic of Texas
Thanks, John.
I already have the forward brake and shifter installed, but the link to the parts below was on the same page. Some of the reviews said the bolts were flimsy, bit I can replace those. Not too crazy about the single attachment point, but for the price I may give these a shot. If I like the ride and find the quality an issue, I'll know the more expensive stuff is worth the price.
I already have the forward brake and shifter installed, but the link to the parts below was on the same page. Some of the reviews said the bolts were flimsy, bit I can replace those. Not too crazy about the single attachment point, but for the price I may give these a shot. If I like the ride and find the quality an issue, I'll know the more expensive stuff is worth the price.
Road Master
Joined: Apr 2009
Posts: 750
Likes: 3
From: 3rd Rock
These are modeled after the footboards for the FXD(P) Defender. A police model of the FXD.
http://www.debrix.com/Wyatt-s-Footbo...27-0920-vt.htm
The rear mount brackets come out straight off the mid control mounts and over the top of the exhaust resulting in footboards that are a little further back and a little higher up than the other HDs with boards.
Hope this helps.
Best wishes....Tim(HT)
http://www.debrix.com/Wyatt-s-Footbo...27-0920-vt.htm
The rear mount brackets come out straight off the mid control mounts and over the top of the exhaust resulting in footboards that are a little further back and a little higher up than the other HDs with boards.
Hope this helps.
Best wishes....Tim(HT)
Thread
Thread Starter
Forum
Replies
Last Post
dagnabit
Softail Models
3
Jun 4, 2018 05:03 AM
