lets compare 2into1's!!

Reply Subscribe

Thread Tools

Search this Thread

Dec 24, 2012 | 01:57 PM

#41

aces&8s

Seasoned HDF Member

Joined: Sep 2012

Posts: 6,570

Likes: 590

From: almost there

Never heard of road rage 2 scraping unless you lay it down. There short and ride high compared to anything out there.

Dec 24, 2012 | 03:05 PM

#42

Sparra

Tourer

Joined: May 2010

Posts: 280

Likes: 3

The lower road rage heat shield on my 2010 Wideglide scrapes and I have 12" shocks and don't ride too hard...

Dec 24, 2012 | 04:41 PM

#43

motoxer42

Advanced

Joined: Dec 2011

Posts: 69

Likes: 2

From: Valparaiso In

11'' rear and 1'' drop up front and they don't scrape.

Attached Thumbnails

Dec 24, 2012 | 06:39 PM

#44

07bobber

Ultimate HDF Member

Joined: Mar 2007

Posts: 7,465

Likes: 15

From: Corona, Ca

The road rage 2 is the pipe that hangs low like the t-header the bassani road rage id5250 sits higher

Dec 24, 2012 | 07:25 PM

#45

therealjohnny5

Cruiser

Joined: Nov 2012

Posts: 130

Likes: 0

From: South

Quote:

Originally Posted by powerlab

I went with the comp series...love the look and sounds big...only thing is no heat sheilds..which doesnt bother me...but for the guys that ride with no shorts....no way!!! My bob is a 107 with 58mm tb headwork and headquarters cams....love this pipe

You get any scrape with this? I'm running forwards though.

Dec 25, 2012 | 09:15 AM

#46

powerlab

Cruiser

Joined: Apr 2009

Posts: 243

Likes: 2

pipe

my bike is lowered and so far no scraping at all.....

Dec 25, 2012 | 03:34 PM

#47

97dyna

Cruiser

Joined: Apr 2009

Posts: 119

Likes: 2

From: Central Texas

SuperTrapp SuperMeg - Performance in the mix

Dec 25, 2012 | 04:44 PM

#48

apbtlvr

Road Captain

Joined: Jan 2009

Posts: 593

Likes: 0

From: Baton Rouge, LA

I've always been a TH fan and briefly switched to a rinehart. With tuning both pipes were within 1HP and 1TQ of eachother but the rinehart felt flat on top and just didn't have the sound I had grown to love. That said I switched back to TH on my dyna and it's the only pipe I've ever run on my bagger.

As for dyna exhaust brackets...the early design was so bad I had to keep a spare cuz I was constantly cracking and rewelding. I've put 55K on the new style bracket and it hasn't cracked at all.

Recently I bought a new chrome TH to get jet-hotted black because I always heard how bad the ceramic finish was. Well I put a black TH on my bagger and so far am pleased so will probably sell the chrome dyna TH and take a chance on black.