pics of 1.25" zz top bar on a dyna?
Thread Starter
|
Road Warrior
Joined: Aug 2007
Posts: 1,392
Likes: 43
From: South Australia
pics of 1.25" zz top bar on a dyna?
anyone got bars like these?
8" rise 1.25" zz top bars
any pics of them on your bike?
http://www.liquidchopperstore.com/m40028.html
8" rise 1.25" zz top bars
any pics of them on your bike?
http://www.liquidchopperstore.com/m40028.html
Stage IV
Joined: Jun 2013
Posts: 4
Likes: 0
From: Portland, Or
check this out
I've got the ZZ Top bars with an 8" rise. I also put 1" of alternating stainless and rubber washers to give it a little "cush" the stock setup had way too much back and forth movement for me.
Ultimate HDF Member
Joined: Apr 2008
Posts: 5,384
Likes: 12
From: Out on Deranged
Awesome looking bars. I try to imagine the same height apes. Your hands wind up in the same position but IMO way classier with your setup! Will you be trying to hide those wires in the future?
Tourer
Joined: Jul 2010
Posts: 466
Likes: 3
From: Cave Creek, AZ
I have the ZZ Top Z's with 4.5" pullback risers on my Superglide. See my signature pic. Puts the grips slightly below shoulder height, and the angle keeps my fingers from going numb like the factory bars did.
Sig pic needs updated. I now have the Z bars with 4" risers on the Sportster too, along with forward controls and mini floorboards.
Sig pic needs updated. I now have the Z bars with 4" risers on the Sportster too, along with forward controls and mini floorboards.
Thread
Thread Starter
Forum
Replies
Last Post
