Torque Spec's
#1
10-14-2013, 11:51 AM
Join Date: Oct 2013
Location: Northern CA
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
#2
10-14-2013, 01:03 PM
2014 Dyna Service Manual
All from the Fastener Torque values from the front of the service manual. Im at lunch and dont have time to look into it further.
this is how they are referenced in the book tho.
Axle Nut Front 62-67 ft lbs
Caliper front mounting bolt 28-38 ft lbs
Brake pad pin/bridge bolt, front caliper 15-16ft lbs
brake manifold fastener 36-60 INCH pounds
dont see rotor bolts referenced...
All from the Fastener Torque values from the front of the service manual. Im at lunch and dont have time to look into it further.
this is how they are referenced in the book tho.
Axle Nut Front 62-67 ft lbs
Caliper front mounting bolt 28-38 ft lbs
Brake pad pin/bridge bolt, front caliper 15-16ft lbs
brake manifold fastener 36-60 INCH pounds
dont see rotor bolts referenced...
#4
10-14-2013, 03:22 PM
Join Date: Oct 2013
Location: Northern CA
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
2014 Dyna Service Manual
All from the Fastener Torque values from the front of the service manual. Im at lunch and dont have time to look into it further.
this is how they are referenced in the book tho.
Axle Nut Front 62-67 ft lbs
Caliper front mounting bolt 28-38 ft lbs
Brake pad pin/bridge bolt, front caliper 15-16ft lbs
brake manifold fastener 36-60 INCH pounds
dont see rotor bolts referenced...
All from the Fastener Torque values from the front of the service manual. Im at lunch and dont have time to look into it further.
this is how they are referenced in the book tho.
Axle Nut Front 62-67 ft lbs
Caliper front mounting bolt 28-38 ft lbs
Brake pad pin/bridge bolt, front caliper 15-16ft lbs
brake manifold fastener 36-60 INCH pounds
dont see rotor bolts referenced...
Thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
