GPS power cable routing
Thread Starter
|
Tourer
Joined: Aug 2011
Posts: 290
Likes: 0
From: MX/AZ/NV
GPS power cable routing
2011 FXDC SuperGlide
I found one of these contraptions to run power to a handlebar mounted Garmin Nuvi..... from the battery SAE leads. (where I plug in a batt charger)
http://www.leadermotorcycle.com/usb-...i-micro-apple/
Any suggestions on where to route the cable from the battery leads to the handlebars so the cable won't melt or burn?
I found one of these contraptions to run power to a handlebar mounted Garmin Nuvi..... from the battery SAE leads. (where I plug in a batt charger)
http://www.leadermotorcycle.com/usb-...i-micro-apple/
Any suggestions on where to route the cable from the battery leads to the handlebars so the cable won't melt or burn?
Ultimate HDF Member
Joined: May 2008
Posts: 6,642
Likes: 48
From: Ogden, UT
Run them along with all the other wires from under the seat to the neck in the frame, easy enough to do. Use a electricians fish tape or something similar to pull them through.
This would be a better option for the adapter, especially if you mounted your connection, the flexible pigtail would make life easier.
http://www.ebay.com/itm/261307995222...84.m1423.l2649
This would be a better option for the adapter, especially if you mounted your connection, the flexible pigtail would make life easier.
http://www.ebay.com/itm/261307995222...84.m1423.l2649
Thread Starter
|
Tourer
Joined: Aug 2011
Posts: 290
Likes: 0
From: MX/AZ/NV
Run them along with all the other wires from under the seat to the neck in the frame, easy enough to do. Use a electricians fish tape or something similar to pull them through.
This would be a better option for the adapter, especially if you mounted your connection, the flexible pigtail would make life easier.
http://www.ebay.com/itm/261307995222...84.m1423.l2649
This would be a better option for the adapter, especially if you mounted your connection, the flexible pigtail would make life easier.
http://www.ebay.com/itm/261307995222...84.m1423.l2649
And about $30 bucks less than Leader, with the outrageous shipping charge of $11 bucks!!
How did that shipping from Hong Kong China work out? Transit time?
Ultimate HDF Member
Joined: May 2008
Posts: 6,642
Likes: 48
From: Ogden, UT
Here are a couple more, I haven't ordered it yet. Both in the US, didn't realize the other was China, I usually check the US only option.
http://www.ebay.com/itm/321209514639...84.m1423.l2649
http://www.ebay.com/itm/170946209673...84.m1423.l2649
http://www.ebay.com/itm/321209514639...84.m1423.l2649
http://www.ebay.com/itm/170946209673...84.m1423.l2649
Thread Starter
|
Tourer
Joined: Aug 2011
Posts: 290
Likes: 0
From: MX/AZ/NV
Run them along with all the other wires from under the seat to the neck in the frame, easy enough to do. Use a electricians fish tape or something similar to pull them through.
This would be a better option for the adapter, especially if you mounted your connection, the flexible pigtail would make life easier.
http://www.ebay.com/itm/261307995222...84.m1423.l2649
This would be a better option for the adapter, especially if you mounted your connection, the flexible pigtail would make life easier.
http://www.ebay.com/itm/261307995222...84.m1423.l2649
And about $30 bucks less than Leader, with the outrageous shipping charge of $11 bucks!!
Did you order one from that Hong Kong China Ebayer?
Transit time from there?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Blaque_Nite
Dyna Glide Models
4
Apr 1, 2019 08:25 AM
