cable and lines measurement for new apes?
Thread Starter
|
Intermediate
Joined: May 2013
Posts: 27
Likes: 0
From: Absecon, NJ
cable and lines measurement for new apes?
Hey guys,
I am currently waiting on some 1 1/2" open apes from BR's customs bars and was wondering if any of you guys could help me out with the measurement of the break lines, clutch cable, and throttle in advance. They are 11" rise with 1 1/2" risers for a total rise of 12 1/2". Hopefully some of you have similar specs and can help me out.
Thanks!
I am currently waiting on some 1 1/2" open apes from BR's customs bars and was wondering if any of you guys could help me out with the measurement of the break lines, clutch cable, and throttle in advance. They are 11" rise with 1 1/2" risers for a total rise of 12 1/2". Hopefully some of you have similar specs and can help me out.
Thanks!
Elite HDF Member
Joined: Jul 2007
Posts: 4,749
Likes: 16
From: sand mountain Alabama
Best thing is to measure it from end to end then add for the extra rise.
With a search you can find the brake line and cable lengths you need.
here is a cable that should work
http://www.cruisercustomizing.com/la...t/LA-8210KT-13
The venders here can also take care of your request.
With a search you can find the brake line and cable lengths you need.
here is a cable that should work
http://www.cruisercustomizing.com/la...t/LA-8210KT-13
The venders here can also take care of your request.
Thread
Thread Starter
Forum
Replies
Last Post
rowdy82
Softail Models
7
Jun 28, 2010 08:27 AM
