Trailer harness question.
Thread Starter
|
Stage II
Joined: Apr 2016
Posts: 2
Likes: 0
From: San Antonio, Tx
Trailer harness question.
I recently purchased a used 21013 Electra Glide Ultra limited. The previous owner has installed a stage two audio system with an amp located under the tour box. Also, he added led's in all lights fore and aft. I want to wire for a trailer, however, the plug from the rear lights is plugged into a split harness that runs fore and aft. Does anyone have any experience with such a scenario? Would adding trailer lights overload the battery.
Thanks for any help.
Thanks for any help.
Tourer
Joined: Jan 2016
Posts: 344
Likes: 10
From: Pensacola, FL
Overload the battery? NO!
But do know you can not go by color coated wiring to hook into bike.
Also depends if trailer wiring is 4 prong or 5-6 prong setup.
Does the trailer have separate turn signals or are they part of the tail lights?
But do know you can not go by color coated wiring to hook into bike.
Also depends if trailer wiring is 4 prong or 5-6 prong setup.
Does the trailer have separate turn signals or are they part of the tail lights?
Thread Starter
|
Stage II
Joined: Apr 2016
Posts: 2
Likes: 0
From: San Antonio, Tx
Thanks for the come-back. My trailer is a five wire. I had it hooked up to my previous bike but it did not have all the LED lights and double amp sound system that this bike has. That is why I was concerned about the added electrical load from the trailer.
Road Master
Joined: Jul 2010
Posts: 976
Likes: 212
From: northern nj
Call kurakyn they will have what you need . Had same issue on my 08 ultra , jury had what i needed. What brand trailer ? Bought mine from USA MINI TRAILER IN OKLAHOMA . Took on a 5000 mile trip at 80 mph no issues at all .
Thread
Thread Starter
Forum
Replies
Last Post
m.colley
Hacked, Conversions and Trailering
13
Jul 28, 2015 06:59 PM
wing_rdr
Hacked, Conversions and Trailering
1
Oct 7, 2014 12:51 PM
