Custom Dynamics ?
Stage I
Joined: Jan 2020
Posts: 1
Likes: 0
From: CT
I purchased the front fender tip in recent days and have been having a hard time getting it to work. I pulled the main fuse, cut the stock tip off and now there is no power going to the fender tip wire. I confirmed all the fuses are working, I have been in contact with CD support (they are very responsive). Right now I'm wondering if I have to disconnect the battery to reset the computer to recognize something is connected to the fender. I was hoping some here had some experience with the CD front fender tip as well.
Thread Starter
|
Seasoned HDF Member
Joined: Oct 2019
Posts: 10,841
Likes: 7,474
From: OH
I purchased the front fender tip in recent days and have been having a hard time getting it to work. I pulled the main fuse, cut the stock tip off and now there is no power going to the fender tip wire. I confirmed all the fuses are working, I have been in contact with CD support (they are very responsive). Right now I'm wondering if I have to disconnect the battery to reset the computer to recognize something is connected to the fender. I was hoping some here had some experience with the CD front fender tip as well.
Fender tip bulbs and Probeam tailight arrive tomorrow. Will report results
Thread Starter
|
Seasoned HDF Member
Joined: Oct 2019
Posts: 10,841
Likes: 7,474
From: OH
Previous was stock tailight and 4 led fender bulbs from auto parts store.
Much improved brightness
jmo
Outstanding HDF Member
Joined: Feb 2015
Posts: 2,414
Likes: 433
From: Arkansas
What year and model is the bike? If it is 2013 on up and uses the can bus system will need to be set with the HD Digital Technician as the BCM has an LED setting that only can be set at the dealership.
Thread
Thread Starter
Forum
Replies
Last Post
