Compass 2 inch wiring instructions?
Thread Starter
|
6th Gear
Joined: Aug 2009
Posts: 10
Likes: 0
From: SE US
Compass 2 inch wiring instructions?
I have a 2 inch compass road tech mounted on my 04 Fatboy. All parts were new with instructions. After meeting with the dealer, it appears there are NO instructions for the exact wiring for the compass. I can guess that it is hooked up to the headlight but would like to know if anyone knows for sure?
Thread Starter
|
6th Gear
Joined: Aug 2009
Posts: 10
Likes: 0
From: SE US
Com[*** 2 inch wiring instructions
I guess the joke is on us. The mounts can be found on ebay, that's where I purchased mine. Parts guys at dealerships look at me like I'm stupid...which can sometimes be appropriate, but in this case it's because they've never seen one before! That's a clear indicator that HD figured out fairly quickly that this accy was a loser.
I have both the compass and tach mounted. I get positive comments from folks on how they look...of course, teh compass is not calibrated so it spins slowly all the time...it's just as well, I guess...for the most part I don't really care which way I'm going as long as I'm riding and not at work!!!!
I have both the compass and tach mounted. I get positive comments from folks on how they look...of course, teh compass is not calibrated so it spins slowly all the time...it's just as well, I guess...for the most part I don't really care which way I'm going as long as I'm riding and not at work!!!!
Stage II
Joined: May 2010
Posts: 2
Likes: 0
Hi I went to my harley dealer with pant number and he went on harleys dealer web site and downloaded the instruction.
Thread Starter
|
6th Gear
Joined: Aug 2009
Posts: 10
Likes: 0
From: SE US
2 inch compass wiring
Fellow seekes of 'directions'
I had no trouble mounting or wiring the compass for 'power'. My specific problem is getting it wired so the compass can be calibrated. Mine just spins randomly just as the directions say it is supposed to do. The problem is my instruction sheet never explained specifically which wire gets 'spliced' to the hi/lo beam switch...and I decided not to 'guess'. If y'all have the info or know the sheet number for this info i'd appreciate it if you passed it to me.
Thanks A Million.
God Bless our Fallen Warriors
De Oppresso Liber
I had no trouble mounting or wiring the compass for 'power'. My specific problem is getting it wired so the compass can be calibrated. Mine just spins randomly just as the directions say it is supposed to do. The problem is my instruction sheet never explained specifically which wire gets 'spliced' to the hi/lo beam switch...and I decided not to 'guess'. If y'all have the info or know the sheet number for this info i'd appreciate it if you passed it to me.
Thanks A Million.
God Bless our Fallen WarriorsDe Oppresso Liber
Thread
Thread Starter
Forum
Replies
Last Post
calibration, compass, compass220, davidson, electric, electronic, harley, inch, instructions, kit, manual, problems, road, roadtech, tech, user, wiring
