Engine Mechanical Topics Discussion for motor builds, cams, head work, stripped bolts and other engine related issues. The good and the bad. If it goes round and around or up and down, post it here.

88 to a 96

Reply Subscribe

Search this Thread

Old

Mar 7, 2015 | 04:24 PM

#1

aposto

Thread Starter

|

Novice

Joined: Aug 2010

Posts: 16

Likes: 0

From: MASS

Default

88 to a 96

I have a 06 streetglide. Want to bump it up to a 96. It is fuel injected. My buddy has a 04 roadking carburated he is giving me his jugs and heads are they the same and will they work on my streetglide being fuel injected

Reply

Old

Mar 7, 2015 | 04:29 PM

#2

Campy Roadie

Seasoned HDF Member

Joined: Aug 2011

Posts: 11,814

Likes: 5,120

From: SW Ohio

Default

It won't work. The difference between an 88 and a 96 is stroke not bore. The jugs are the same.

You can bore to 95 and there may be other kits but to answer the question, no.

Reply

Old

Mar 7, 2015 | 06:15 PM

#3

dynawg1

Tourer

Joined: Sep 2014

Posts: 420

Likes: 5

From: Kingsport, TN

Default

Quote:

Originally Posted by Nomadmax

It won't work. The difference between an 88 and a 96 is stroke not bore. The jugs are the same.

You can bore to 95 and there may be other kits but to answer the question, no.

Contact Scott (Hillside), Kirby (prodrag1320), or Steve at GMR about a 97" or 98" big bore kit using your existing rods and crank.

Last edited by dynawg1; Mar 7, 2015 at 06:17 PM.

Reply

Old

Mar 7, 2015 | 06:44 PM

#4

aposto

Thread Starter

|

Novice

Joined: Aug 2010

Posts: 16

Likes: 0

From: MASS

Default

I mean 95 inch are the heads the same. Can I bore the jugs and have the heads ported . And use them on my streetglide that is fuel injected

Reply

Old

Mar 7, 2015 | 06:47 PM

#5

dynawg1

Tourer

Joined: Sep 2014

Posts: 420

Likes: 5

From: Kingsport, TN

Default

Quote:

Originally Posted by aposto

I mean 95 inch are the heads the same. Can I bore the jugs and have the heads ported . And use them on my streetglide that is fuel injected

Yes to all. Might as well go to 97" or 98". About the same cost and more displacement/compression.

Reply

Old

Mar 8, 2015 | 05:02 PM

#6

prodrag1320

Banned

Joined: Sep 2009

Posts: 3,569

Likes: 624

From: deland,florida

Default

go 98",youde be better off using your `06 heads than the `04 heads though

Reply

Old

Mar 9, 2015 | 06:05 AM

#7

Hillsidecycle.com

Sponsor

Joined: Dec 2007

Posts: 12,084

Likes: 829

Default

Quote:

Originally Posted by aposto

I have a 06 streetglide. Want to bump it up to a 96. It is fuel injected. My buddy has a 04 roadking carburated he is giving me his jugs and heads are they the same and will they work on my streetglide being fuel injected

Bore your cylinders to 98" with your heads.
Scott

Reply

Reply Subscribe

Related Topics

Thread

Thread Starter

Forum

Replies

Last Post

103 jugs and pistons=poor mans 96?

pkachoochoo

Softail Models

17

Feb 12, 2026 05:51 AM

Will 103 heads for fuel moto 107 kit?

Lawdawg

Touring Models

8

Apr 6, 2018 11:51 AM

Two Lane Tramp

Dyna Glide Models

4

Oct 16, 2015 03:28 PM

Txn09

Touring Models

4

Aug 21, 2013 05:31 PM

96 Inch Jugs and Heads

droffas

Exhaust System Topics

4

Nov 11, 2007 02:29 PM

Reply Share

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 04:34 AM.