120r setups
#1
04-04-2016, 11:26 PM
Join Date: Oct 2006
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
#2
04-05-2016, 06:10 AM
Sponsor
A great plug/play cam for those is a Wood 9B.
Fills in the torque sag.
If the heads are coming off, we'd suggest a Wood 9F, or T-Man 662-2.
A 66mm S&S T/Hog if TBW, and a D&S Borezilla would pull it all togather.
Scott
Fills in the torque sag.
If the heads are coming off, we'd suggest a Wood 9F, or T-Man 662-2.
A 66mm S&S T/Hog if TBW, and a D&S Borezilla would pull it all togather.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#4
04-05-2016, 11:29 AM
Sponsor
Thread
Thread Starter
Forum
Replies
Last Post
