When I was taking my daughter to school the other morning my oil light flashed for a second then went off. I noticed a slight loss of power and the bike sounded different. When I got home I checked the oil and noticed it was low. I refilled the oil and checked for codes. I got a P0154 P0134 and P0131 which tell me the ECM is looking for my oxygen sensors which I do not have in because I have a PCV installed. I have an S&S stealth air cleaner with the Rush Wrath 2 into 1 pipe on the bike. I was told one day by Powercommander that I needed the o2 eliminators and he would send them to me but I declined due to I am about to order a TTS. I now have to wait a couple weeks on the TTS and contacted Powercommander again and now they say i do not need the eliminators that it will not hurt my bike. This makes no sense to me one tells me one thing another tells me another thing. My question is due to the low oil did my motor go into some kind of protection mode? My exhaust is not nearly as loud as it used to be before this happened and it feels like I dont have the power I use to. Also while checking my codes I got a list of the following part numbers:
68349-08
67348-04d
32999-11
68920-07
67349-08

I have no idea what all that means.

Thanks

 

Well ok...if I disconnect the battery for let's say an hour will that reset the ecm?