Engine Mechanical TopicsDiscussion for motor builds, cams, head work, stripped bolts and other engine related issues. The good and the bad. If it goes round and around or up and down, post it here.
One thing I'm trying to figure out is why you only went with 10.8:1 with the 60° intake valve closing. I would have thought you would have brought more of the potential of that cam out with 11.3-.4:1 static compression. still would have been really good Street manners....... Definitely would made a nice difference even on the bottom end as Dave said....
Really good result for the low compression! That's right in the zone SnS advertises these kits. Looks like the pipe did real well too! Awesome Chris, and if you ever want that extra 15/15 it's always right there w minimal work
Good morning guys. I agree I could have gotten more out of it. This is way more power than I've ever had. I wanted to be as safe as possible and still get close to 130/ 130. I think I accomplished that.
Yes you did.... And when this one gets boring you still have a star to shoot at.... And you will....lol.... It's only a matter of time.... Enjoy and ride safe.....