Need help with compression
HDF Community Team
Joined: Jun 2006
Posts: 12,784
Likes: 2,613
From: san antonio
If you have the $$, the HPI 55 is the best.
A forward facing air filter like the SE Heavy Breather will help out as well.
A forward facing air filter like the SE Heavy Breather will help out as well.
Cruiser
Joined: Jun 2012
Posts: 157
Likes: 12
From: san diego
My bIke was running in the 197 range w s&s 585 cam. Do stick compression releases in it, mine didn't have them. Let's just say I can nearly r&r starter clutches and ring gears blind folded. And changed battery's with oil changes nearly.
Ping wise, it doesn't like to be lugged but once the rpms are up only when have gotten total crap gas or its cranking on the 100o mark.
Ping wise, it doesn't like to be lugged but once the rpms are up only when have gotten total crap gas or its cranking on the 100o mark.
Thread Starter
|
Cruiser
Joined: Apr 2017
Posts: 186
Likes: 3
From: Michigan
I recently put forward facing air cleaner on, Arlen Ness Monster Sucker
HDF Community Team
Joined: Jun 2006
Posts: 12,784
Likes: 2,613
From: san antonio
Personally, I would pay the return shipping and include a nasty letter with the parts just so I could move on but that's just me.........................
Elite HDF Member
Joined: Jul 2007
Posts: 3,903
Likes: 1,122
From: 48.067222,12.863611
Listen to DJl. I have a 50mm SE on an all bore 107" Just had a new cam put in after 3 years and different muffler. Was going to go to a bigger a TB. He tuned it with the 50mm that I had. Did 130 TQ and 120 HP I believe he said. This was up from 116/112. You have plenty of TB for a 98" 
Thread Starter
|
Cruiser
Joined: Apr 2017
Posts: 186
Likes: 3
From: Michigan
Your right, I didn't choose the best wording. What I was getting at is I don't feel I should be responsible to pay to send anything backand I don't care if it's $60 or $20
Thread
Thread Starter
Forum
Replies
Last Post
