Found very small flanged sleeve or bushing?
Thread Starter
|
Novice
Joined: Feb 2024
Posts: 22
Likes: 0
From: CA
Found very small flanged sleeve or bushing?
Late model 84 xlx Was tilting engine to both sides. Found a tiny brass or bronze bushing or sleeve that is flanged on one side. On the ground afterward. Neither side cover was on so not sure where it came from can anyone tell me please.
Last edited by Robby94; Apr 25, 2024 at 04:43 AM.
Thread Starter
|
Novice
Joined: Feb 2024
Posts: 22
Likes: 0
From: CA
If it is then I don't know how it could've fell out of the case but might've? I'll have to wait till I get a puller so I can reach and remove the trap door or split the case again, to see if that was it, can't find anywhere else though so high possibility that's where its from.Thank you
Cruiser
Joined: Apr 2020
Posts: 182
Likes: 80
From: Northeast USA
That bushing looks similar to the bushings (2) in my jiffy stand pivot. 2020 soft tail. Did you recently remove your jiffy stand?
Last edited by Lammy1000; Apr 25, 2024 at 07:56 AM.
Trending Topics
Thread Starter
|
Novice
Joined: Feb 2024
Posts: 22
Likes: 0
From: CA
@Lammy1000 no I haven't and it definitely came out of the case somewhere. Engines removed out of frame and away from it.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
Thread Starter
|
Novice
Joined: Feb 2024
Posts: 22
Likes: 0
From: CA
Thank you. Still wondering how this would've fallen out of the case of its inside, then again who knows it had a blown trans and I had to replace the right side case, but this piece was not anywhere to be found until way after I put the halves together and wasn't in the same area when I did, it just showed up after I had the engine on its llsides without the covers on either side. Strange.