Flange Retaining Ring Pliers
Thread Starter
|
Tourer
Joined: Jul 2005
Posts: 386
Likes: 6
From: Huntsville, AL
Flange Retaining Ring Pliers
Does anyone know where I can get a pair of inexpensive flange retaining ring pliers?
I've got snap ring pliers but they won't work on the flange ring. I saw a pair on Sear's website but they were 55 bucks.
Thanks.
I've got snap ring pliers but they won't work on the flange ring. I saw a pair on Sear's website but they were 55 bucks.
Thanks.
Road Warrior
Joined: Dec 2008
Posts: 1,476
Likes: 23
From: Summit, Mississippi
Plunder through those $10 grab-bag specials you see at parts and equipment houses when you get close. I have ran across some pretty good stuff in there more than once.
Are you talking about the exhaust flange rings?
Are you talking about the exhaust flange rings?
Road Warrior
Joined: Dec 2008
Posts: 1,476
Likes: 23
From: Summit, Mississippi
Yep....that's why I wanted to make sure what bama was talking about. You can pry the suckers off with a screwdriver over the end if you need to. Pry them back on and bend 'em a little to make sure they go back down in the slot in the flange and they will self-heal themselves when you put the pipes back on.
I do have a set of the pliers he is talking about for things like transmission and gear-box work, but I would not go purchase a pair just for the exhaust clips.
I do have a set of the pliers he is talking about for things like transmission and gear-box work, but I would not go purchase a pair just for the exhaust clips.
Thread
Thread Starter
Forum
Replies
Last Post
misfitJason
Dyna Glide Models
33
Jun 8, 2014 09:36 PM
palmettosunshine
Exhaust System Topics
5
Oct 9, 2008 08:56 PM
