95" build
Thread Starter
|
Cruiser
Joined: May 2013
Posts: 142
Likes: 0
From: Grand Haven, Mi.
95" build
Got a question, that probably has many answers.
I have a 2001 dyna sg. 88"
I am a gathering parts for a 95" build.
So far I have the pistons and cylinders, SE-204 cams ,
From bigpete , stated to be 9.4:1 with stock heads.
Adjustable pushrods on order, gaskets, bearings, and tensioner shoes.
I bought a set of edelbrock ported heads on eBay, but the guy is a piece of **** and never sent them.
Now a guy told me I should just look for some stock 96" heads, as a cheap alternitave.
I'm not building a screaming race bike, but would like a good runner that pulls harder than now.
Money isn't a huge issue, but I'm not buying $1000 heads either, as I still needs pipes too.
Should I look for a set of 96", or look for some ported 88" ??
Any input is appreciated.
I have a 2001 dyna sg. 88"
I am a gathering parts for a 95" build.
So far I have the pistons and cylinders, SE-204 cams ,
From bigpete , stated to be 9.4:1 with stock heads.
Adjustable pushrods on order, gaskets, bearings, and tensioner shoes.
I bought a set of edelbrock ported heads on eBay, but the guy is a piece of **** and never sent them.
Now a guy told me I should just look for some stock 96" heads, as a cheap alternitave.
I'm not building a screaming race bike, but would like a good runner that pulls harder than now.
Money isn't a huge issue, but I'm not buying $1000 heads either, as I still needs pipes too.
Should I look for a set of 96", or look for some ported 88" ??
Any input is appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
