Hey folks. Looking to pick up a rocker box wrench. Any suggestions?

 

Not exactly sure what your referring to but many have resorted to making a special tool themselves.

I have a drawer in the tool box that has all sorts weird looking stuff in it.

WP

Ahh I looked it up The ratchet style would be a +

 

JP Cycle has them. Or just cut down an Allen wrench and use a ratcheting wrench (gearwrench, etc.) on it.

 

This is what I did and it worked just fine.

 

I cut one down, it worked.

 

I have a ratcheting one and it works. I also use a cut down Allen and that works too with a ratcheting wrench

 

I just cut back the "short" end of a long pattern 3/16 Allen wrench until it fit.

 

I like the HD Screaming Eagle Rocker Box Bolt Ratcheting Wrench,
part number: 94057-09
Order it through one of the HD Internet parts sellers along with some other maintenance items you may need. US$29 from Boardtracker HD.


http://www.boardtrackerharleyonline....ge_612407714=0

This is the same exact tool as the KASTAR #6529 and Lang #6529

http://www.langtools.com/sku-6529-ro...g-bolt-wrench/

The part number for replacement bits are:
HD: 94143-09
LANG: 703

I find this tool useful for getting to the radio bolts on the touring bikes.

 

Just any old one laying around and your trusty angle grinder...
Tom

 

Is this thread like the suggestion box I have at work?

Ummm, let's see, hmmmm... I know.....
Might I suggest that we move to a better climate so we don't have to sit around making suggestions and go out and put in a good ride.... Lol.... Cheers.....