Ignition pickup sensor - 91 Flhtc
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
Lots of us have been there! The replacement looks similar yet different, because I suspect they have used a better potting compound which is more durable than the melting variety.
There is a good reason for replacing your entire ignition system with the Dynatek 2000i. The stock ignition module uses advance curves designed to meet EPA regulations, not optimum ones. If you swap over to a Dynatek you should enjoy improved performance and general ride quality, while replacing your old pickup.
There is a good reason for replacing your entire ignition system with the Dynatek 2000i. The stock ignition module uses advance curves designed to meet EPA regulations, not optimum ones. If you swap over to a Dynatek you should enjoy improved performance and general ride quality, while replacing your old pickup.
Thread Starter
|
Advanced
Joined: Dec 2007
Posts: 67
Likes: 9
From:
This would be a better choice IMO.
https://www.amazon.com/Dynatek-2000i...=dynatek+2000i
https://www.amazon.com/Dynatek-2000i...=dynatek+2000i
Per-Řivind
Dirt don't hurt
Joined: Jan 2011
Posts: 21,065
Likes: 4,561
From: Haslet Texas
The Ultima is a Chinese knock off of the Dynatek and is*supposed to be a good unit but I buy American where I can.
Seasoned HDF Member
Joined: Jun 2015
Posts: 10,284
Likes: 7,766
From: West Central FL
This would be a better choice IMO.
https://www.amazon.com/Dynatek-2000i...=dynatek+2000i
https://www.amazon.com/Dynatek-2000i...=dynatek+2000i
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
Actually the reverse is true, as I explain above! Aftermarket gives us better advance curves than the stock module. A cheap tune-up!
Thread Starter
|
Advanced
Joined: Dec 2007
Posts: 67
Likes: 9
From:
Lots of us have been there! The replacement looks similar yet different, because I suspect they have used a better potting compound which is more durable than the melting variety.
There is a good reason for replacing your entire ignition system with the Dynatek 2000i. The stock ignition module uses advance curves designed to meet EPA regulations, not optimum ones. If you swap over to a Dynatek you should enjoy improved performance and general ride quality, while replacing your old pickup.
There is a good reason for replacing your entire ignition system with the Dynatek 2000i. The stock ignition module uses advance curves designed to meet EPA regulations, not optimum ones. If you swap over to a Dynatek you should enjoy improved performance and general ride quality, while replacing your old pickup.
I have the Dyna ignition modul, but have too get that checked out if It's broken, and makes the problem l have.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Thread Starter
|
Advanced
Joined: Dec 2007
Posts: 67
Likes: 9
From:
A friend bought the Ultima couple years ago and did what it supposed to do. Easy install and a cheap solution.
Thread Starter
|
Advanced
Joined: Dec 2007
Posts: 67
Likes: 9
From:
Yeah it's a cheaper fix up, but you don't have the opportunity to tune up if you have or is going to change cam/intake, different muffler etc.