Help me find....,
Thread Starter
|
Seasoned HDF Member
Joined: Dec 2010
Posts: 6,849
Likes: 1,389
From: Florida
Help me find....,
I am trying to find a vented evo points cover. I used to see them in all the catalogs years ago where they were kinda mesh looking. Anyway..., I can't find the now to get one now that I am looking for one. Any help locating would be appreciated.
I could even use a stock points cover (one of the aluminum ones) to drill holes in to make it vented. Funny enough I couldn't find a single one at the swap meet today
It was like this
I could even use a stock points cover (one of the aluminum ones) to drill holes in to make it vented. Funny enough I couldn't find a single one at the swap meet today
It was like this
Last edited by misfitJason; Nov 10, 2019 at 06:39 PM.
Dirt don't hurt
Joined: Jan 2011
Posts: 21,066
Likes: 4,566
From: Haslet Texas
Something like this?
https://www.jpcycles.com/product/834...h-timing-cover
Info says it's a 3 piece cover so you might be able to modify it easily enough.
https://www.jpcycles.com/product/834...h-timing-cover
Info says it's a 3 piece cover so you might be able to modify it easily enough.
Dirt don't hurt
Joined: Jan 2011
Posts: 21,066
Likes: 4,566
From: Haslet Texas
Not sure why you'd want one.
The 2ki is made for the heat but I don't know how well sealed they are against water.
It sure would suck to get stuck in a rain storm because the rain shorted out your ignition.
The 2ki is made for the heat but I don't know how well sealed they are against water.
It sure would suck to get stuck in a rain storm because the rain shorted out your ignition.
Thread
Thread Starter
Forum
Replies
Last Post
