Parts interchangeability?
Thread Starter
|
Seasoned HDF Member
Joined: Nov 2006
Posts: 21,089
Likes: 19,250
From: The Wasteland
I got a steal on a full exhaust from a 2014 Dyna. Stock head pipes with some nice Vance and Hines slip ons for $50.
Does anyone know what size and length of bolt I need to plug the bungs for the o2 sensors?
Does anyone know what size and length of bolt I need to plug the bungs for the o2 sensors?
Intermediate
Joined: Jul 2021
Posts: 49
Likes: 37
From: AK
Thread Starter
|
Seasoned HDF Member
Joined: Nov 2006
Posts: 21,089
Likes: 19,250
From: The Wasteland
Well the full exhaust I picked up didnt fit. My bike has a set of Vance & Hines long shots and it appears the factory exhaust bracket is missing. The 2014 exhaust mounting bracket didnt come with the system I bought.
But the silver lining is I figured out what that annoying rattle was. While I had everything apart I figured I would just start over so I took the exhaust apart all the way to the manifold. The rear pipe bolts were loose at the manifold so I tightened them up and put everything back together and no more rattle!
But the silver lining is I figured out what that annoying rattle was. While I had everything apart I figured I would just start over so I took the exhaust apart all the way to the manifold. The rear pipe bolts were loose at the manifold so I tightened them up and put everything back together and no more rattle!
Last edited by Bubba Zanetti; Aug 29, 2021 at 03:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
