Primary leak
Grand HDF Member
Joined: Oct 2006
Posts: 3,665
Likes: 714
From: DFW
Muskrat,
I’m wondering if that leak might be working out around that bottom screw. Have you tried putting silicone on the screw itself before running it in the hole..??
That non-hardening aviation sealant is good stuff. That might work as well, maybe better.
Just a thought.
I’m wondering if that leak might be working out around that bottom screw. Have you tried putting silicone on the screw itself before running it in the hole..??
That non-hardening aviation sealant is good stuff. That might work as well, maybe better.
Just a thought.
Thread Starter
|
Tourer
Joined: Jul 2019
Posts: 485
Likes: 445
From: Lithgow NSW Australia
G'day guido, Greeny.
I'll give that a go. I always use Loctite 567 on sump/drain plugs so I'll try that with the old memade gasket while waiting for the new one to arrive. I make most of my gakets. The reason I use Permatex #3 is most of the time I can reuse the gasket.
Cheers
I'll give that a go. I always use Loctite 567 on sump/drain plugs so I'll try that with the old memade gasket while waiting for the new one to arrive. I make most of my gakets. The reason I use Permatex #3 is most of the time I can reuse the gasket.
Cheers
Thread
Thread Starter
Forum
Replies
Last Post
