help!
Thread Starter
|
6th Gear
Joined: Jun 2010
Posts: 12
Likes: 0
help!
i was told the dyna 2000 replaces the old screamin eagle #32596-96 ignition module. i will have it tomorrow or sat morning. i'll let you know if it works as soon as i install it. thanks to those who helped me on this delima.
Thread Starter
|
6th Gear
Joined: Jun 2010
Posts: 12
Likes: 0
help!
i was told the dyna 2000 replaces the old screamin eagle #32596-96 ignition module. i will have it tomorrow or sat morning. i'll let you know if it works as soon as i install it. thanks to those who helped me on this delima.
Thread Starter
|
6th Gear
Joined: Jun 2010
Posts: 12
Likes: 0
when i would jack my bike up to clean it, it wouldnt start,but when i let it down it would and the whoopty doo"s on the road would make it cut out. got to checking the wires and the purple and red had cuts in them. i re-wired them and while it was running when i checked to see if that fixed it, those wires touched and shorted out. the problem was the wires was too short and when the swing arm would stretch out it slowly pulled them apart.
Elite HDF Member
Joined: Sep 2007
Posts: 4,468
Likes: 12
From: Bluffton, South Carolina
The Ultima module is made by Dyna and is basically the same module.
Thread Starter
|
6th Gear
Joined: Jun 2010
Posts: 12
Likes: 0
help!
this is for MrFXRS-SP....that dyna 2000p is the ignition module i replaced the screamin eagle #32596-96 and i just rode my bike with no regrets on tyhe purchase. it also has 5 curves u can set for whatever mods u have on your bike. it cost $216.00 out of pocket. I ordrered it yesterday and got it today thru a place in lewisville tx. called PARTS BROTHERS. all other places including HD was $249.99 plus. i"m very satisfied but will know more tomorrow when i get it out on the road and put some power to it.
Thread
Thread Starter
Forum
Replies
Last Post
sealdoggy04
Ignition/Tuner/ECM/Fuel Injection
0
Dec 27, 2009 11:03 PM
