jetting question after cam install

Reply Subscribe

Thread Tools

Search this Thread

Jul 20, 2010 | 12:32 PM

redrott

Thread Starter

Advanced

Joined: Dec 2009

Posts: 93

Likes: 4

jetting question after cam install

I am getting ready to drop in the ev-27 in my evo. I have 46 pilot jet and 185 main currently. The instructions with the cam say you may have to goto a 48-50 pilot jet and 195 main. Have any of you that have done the cam swap did this or what jetting are you guys using. Any help would be great thanks.

Jul 29, 2010 | 12:00 PM

98fat

Tourer

Joined: Mar 2010

Posts: 276

Likes: 1

too rich in my opinion, I dropped a Dave Mackie DM500 into my Evo (similiar to the 27 and stayed about where you are.

Jul 29, 2010 | 12:46 PM

96roadking

Outstanding HDF Member

Joined: Mar 2010

Posts: 2,877

Likes: 2

From: Hallsville, Tx.

Wow, that does sound rich. EV-27 isn't a drastic departure from stage one. Drop in some new plugs after the cam install and take a look at them after 100 miles or so. Mine is an EFI, I use a Revtech DFO that I have had to lean out a bit after installing the cam.