When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just ended up with a low mileage 94' FXSTC in a trade a couple of weeks ago, my original intentions were to clean it up and resale it. But on the way home with I kinda fell in love with the old girl. Somebody had put a set of elcheapo single element signal lights on the front, and had attempted to wire an equalizer, notice I said attempted, 'm going to go back with original style turnsignals (probably late model small ones). My problem is I have power at the switches, but cantget any power to the wires going to the lamps. Could it be that the P O could have toasted the module with the crappy wiring job? Any Ideas?
Activate each turn signal switch and check for voltage going into the module. If you are hot there it's the module. Good luck!
On a related story I thought my turn signal module had failed last season as it only worked when the bike sat and ignition switch was in "accesories" postion. I thought it was either the module or the ignition switch. Turned out to be the voltage regulator was dieing and putting out weak current causing the module not to work.
90-95 modules were never very good...and all you can get now are aftermarket replacements..which suck even worse. For half the price of an aftermarket copy of the Harley part....you can get a badlands module...or just wire in a car flasher and make the signals"push and hold" like the older bikes...for a couple of bucks
90-95 modules were never very good...and all you can get now are aftermarket replacements..which suck even worse. For half the price of an aftermarket copy of the Harley part....you can get a badlands module...or just wire in a car flasher and make the signals"push and hold" like the older bikes...for a couple of bucks
Maybe so and my OEM module on my '91 FLHS is still going strong and not missing a beat since I replaced the voltage regulator.
I just ended up with a low mileage 94' FXSTC in a trade a couple of weeks ago, my original intentions were to clean it up and resale it. But on the way home with I kinda fell in love with the old girl. Somebody had put a set of elcheapo single element signal lights on the front, and had attempted to wire an equalizer, notice I said attempted, 'm going to go back with original style turnsignals (probably late model small ones). My problem is I have power at the switches, but cantget any power to the wires going to the lamps. Could it be that the P O could have toasted the module with the crappy wiring job? Any Ideas?
Hi,If you read my reply to grbrowns . *DODGY GROUND/EARTH thread very recently, in which I described my previous probs. with Turn Signals not working , It may be of help. My reply is in *page2 .Bungo.
Last edited by BungoBill; May 2, 2011 at 05:11 AM.
Reason: spelling error
I looked at the Badlands module and liked it. Has anyone replaced theirs with the Badlands module? Does it just wire in with the old module in place or does the old one have to be bypassed? Got to get some signals on this thing to pass inspection.
I looked at the Badlands module and liked it. Has anyone replaced theirs with the Badlands module? Does it just wire in with the old module in place or does the old one have to be bypassed? Got to get some signals on this thing to pass inspection.
You'll be replacing the existing one so cut that one out and run the wires to the new one. Badlands should provide a nice wiring diagram to show you where the wires go. I would totally remove the old one to avoid confusion in the future plus make room for the replacement unit.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.