problems with my 98 bagger
Thread Starter
|
Stage II
Joined: Aug 2009
Posts: 2
Likes: 0
problems with my 98 bagger
had my engine rebuilt with sreaming eagle heads, +.010 over, se cam, carb, rebuilt clutch, rebuilt trans with twist gear also had the oil pump rebuilt.
problem is oil gauge goes to zero and oil light comes on. this happens after about 10 miles of riding.shut bike off for a couple of minutes and start back up light is off and gauge is right. go 10 more miles same problem.
help
problem is oil gauge goes to zero and oil light comes on. this happens after about 10 miles of riding.shut bike off for a couple of minutes and start back up light is off and gauge is right. go 10 more miles same problem.
help
Elite HDF Member
Joined: Sep 2007
Posts: 4,468
Likes: 12
From: Bluffton, South Carolina
Sounds like they either need to re-rebuild the oil pump!! How was the pressure before the rebuild?? Did they do anything to the cam, cam bushings/bearing, oil lines/oil tank, lifters, or lifter bores??
John
John
Thread Starter
|
Stage II
Joined: Aug 2009
Posts: 2
Likes: 0
taking it back tomorrow.
Thread
Thread Starter
Forum
Replies
Last Post
Mickey-
Touring Models
15
Aug 29, 2017 07:22 PM
