When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i have a 06 dyna 95in. s.e204s,s.e.heavy breather,2.0 rush slipons. making 90hp,95trq now.i am buying a v&h propipe bp .will it make as much power as the rush slipons ?? will i have to retune for it?? anybody want rush 2.0 slash downs for a dyna cheap p.m me .
Not sure you will gain much hp but, Willing to bet tq will go up a couple points and hit sooner in the rpms.I had a nightrain with same build w/ propipe it was 88hp 97 tq
thanks,i have ported heads,9.6 comp.thinking about going to 211s.the 204s pull hard up to 5500,the 211s should be a little better cams for a dyna. ran 8.0s at90mph in the tx allharley drags,1/8 mile. need to get it in the high 7s.
Not diss'n the 211's but,couple buddys tried them and were disappointed.One of my buudies has a 103 w/211's s/e heads and he can't catch me.He has been to the dyno twice trying to get it better.Also i don't think 9.6 comp is enough for 211's.Others on here would know better than me.
i have 2004 fatboy jim, 95 big bore.im running the woods tw6g cam which is a 510 lift.very very torquey cam, along with the pro pipe among other goodies. im getting 97 hp and 110 tq. my speed shop is a big fan of this pipe. this guy has been around harleys for 28 yrs and was also racing these bikes. so i do trust him fully. just my 2 cents.
My bike is at an shop right now for a 95" upgrade.SE flat tops,adj. pushrods,Andrews 26G,head work.The builder told my to go with a 2-1 for max. performance.He recomended Propipe,Bassani Road Rage and Thunderheader.I went with the Propipe BP mainly because it comes with heat sheilds.
To answer your question the 2-1 will give more power(from what I have read and been told) and you should have it retuned for the new pipe if you want to gain the maximum HP/torque.
Last edited by 1flhtk4me; Nov 17, 2008 at 07:31 AM.
i have a 06 dyna 95in. s.e204s,s.e.heavy breather,2.0 rush slipons. making 90hp,95trq now.i am buying a v&h propipe bp .will it make as much power as the rush slipons ?? will i have to retune for it?? anybody want rush 2.0 slash downs for a dyna cheap p.m me .
Are they black or chrome? I am looking for some black slip-ons.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.