petcock issue
Thread Starter
|
4th Gear
Joined: Aug 2009
Posts: 8
Likes: 0
From: chicago, il
petcock issue
so i recently bought a new petcock to replace the stock. stock had a downward spigot out the bottom. my new v-twin high flow petcock has a backside downward spigot and the fuel line rests on the engine. so i was just wondering if that would damage or melt the fuel line. its a 5/16 inner dia line since the new petcock has a 3/8 spigot on it. 
Thread Starter
|
4th Gear
Joined: Aug 2009
Posts: 8
Likes: 0
From: chicago, il
i ended up rotating it for now so theres about 3/4" of room between the line and the motor now. only problem now is i have a dead battery and no charger. its a never ending battle....
Sponsor
Joined: Dec 2007
Posts: 12,084
Likes: 829
Be aware of those "Tiawan Tedd" pieces/parts.
We like to stay with either Pingel, of the Golan units when replacing those on clients bikes.
MUCH high quality, rebuildable, and the flow rates are off the chart as well.
Scott
We like to stay with either Pingel, of the Golan units when replacing those on clients bikes.
MUCH high quality, rebuildable, and the flow rates are off the chart as well.
Scott
This thread isn't at all what I thought it would be...
Thread
Thread Starter
Forum
Replies
Last Post
