1991 Heritage Help,Please
Thread Starter
|
Intermediate
Joined: Sep 2011
Posts: 27
Likes: 0
From: Iowa
1991 Heritage Help,Please
Hi,guys can someone help me,I've read so many sites, and talked to so many people,and confused as ever.ok heres the deal,I have a 91 heritage,and was wanting to wake it up a bit,I don't have a tack on my bike so I have no ideal what the rpm range is ridding 75-80 mph,thats were I do most of my ridding,so every body I have asked about what cam to get,I have'nt hear the same one,all diferance,ok also was wanting to bump up compression to 8.5.1 Wiseco Kit K1642, .020 oversized 1353 displacement,flat top,says you need screamun eagle heads,if I have my heads reworked then wont it be ok.Would really like to just do a cam,already have a munki carb on it,but see what the cam does for it,and if I want more then do the heads.Like I said Do most ridding on the highways,I know someone on here has a tack,and can tell me what rpms are on interstate.I guess I just don't understand how their can be so many differant answers,WHAT WOULD BE THE BEST CAM TO BUY,TO HELP ME GET WANT I WANT,MORE POWER ON WHATEVER THE RPM RANGE IS GOING 75-80 MPH,WANT TO BE ABLE TO CRANK IT ON WHEN PASSING,and trying to get their in stepts.Not all at once.Thanks to all that read,and can give advice.Ride Safe.
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
If you call into the Evo section you will find the most popular cam is an Andrews EV27.
If you also want to bump up compression and/or port the heads contact someone like HDF sponsor Hillside Cycle, who can give you expert advice.
If you also want to bump up compression and/or port the heads contact someone like HDF sponsor Hillside Cycle, who can give you expert advice.
Thread
Thread Starter
Forum
Replies
Last Post
