Security System Help Needed
Thread Starter
|
Road Captain
Joined: Aug 2005
Posts: 518
Likes: 27
From: PA
Security System Help Needed
Hi everyone,
My long awaited security module came in today, Finally after 2 months of back order (for a 2006 heritage).
I installed it, but the engine would only start for a second. The security system works fine along with the pager.
I called my dealer and unfortunatly spoke to the A$$hole service manager. This guy is the most arrogant son of a Bitch I know. He says "MMM I think it has to be mated to the bike.
I proceeded to tell him that my 03 dyna didn't have to do that, all i had to do was to plug it in and assign the keyfob. Then he says "Thats why WE work on the bikes" "Were trained for it".
I'm so pi$$ed off right now, I want to grab him by the throat.
My question is,
Does it really have to be matched to the bike after installation?
The new modules talk about auto arming being enabled with the Digital Tech machine, so I'm wondering if he is right (Which is ok, except for the attitude he always gives people).
Smitty
My long awaited security module came in today, Finally after 2 months of back order (for a 2006 heritage).
I installed it, but the engine would only start for a second. The security system works fine along with the pager.
I called my dealer and unfortunatly spoke to the A$$hole service manager. This guy is the most arrogant son of a Bitch I know. He says "MMM I think it has to be mated to the bike.
I proceeded to tell him that my 03 dyna didn't have to do that, all i had to do was to plug it in and assign the keyfob. Then he says "Thats why WE work on the bikes" "Were trained for it".
I'm so pi$$ed off right now, I want to grab him by the throat.
My question is,
Does it really have to be matched to the bike after installation?
The new modules talk about auto arming being enabled with the Digital Tech machine, so I'm wondering if he is right (Which is ok, except for the attitude he always gives people).
Smitty
Road Captain
Joined: Aug 2005
Posts: 517
Likes: 0
From:
RE: Security System Help Needed
Hey Smitty....
I wish I could answer you question but you did provide me with some info. I too have been waiting for the module to finally ship. I kept hearing "they are shipping on the 19th". I've had the Siren II and pager sitting on the shelf for sometime now.
I'm curious to see what the responses will be since hopefully I'll be doing the same thing in the not too distant future.
Brian
I wish I could answer you question but you did provide me with some info. I too have been waiting for the module to finally ship. I kept hearing "they are shipping on the 19th". I've had the Siren II and pager sitting on the shelf for sometime now.
I'm curious to see what the responses will be since hopefully I'll be doing the same thing in the not too distant future.
Brian
Thread Starter
|
Road Captain
Joined: Aug 2005
Posts: 518
Likes: 27
From: PA
RE: Security System Help Needed
They actually got it in today. 68207-00d
Funny thing is I just got home from the York Operations Plant from a private tour (Couldn't bribe anyone there for one) and I had to stop at the dealer to show them the transmission plate guide dowel that was stuck to my transmission drain plug magnet. I found it saturday while doing my 1000 mile service.
Luckly it stuck to the plug during assembly and not in my gears.
Mr personality (The service manager) said the assembler must have had a bad day that day and it fell in the tranny during assembly.
After the treatment I recieved from him today, were going to have a few words together face to face in the near future.
Smitty
Funny thing is I just got home from the York Operations Plant from a private tour (Couldn't bribe anyone there for one) and I had to stop at the dealer to show them the transmission plate guide dowel that was stuck to my transmission drain plug magnet. I found it saturday while doing my 1000 mile service.
Luckly it stuck to the plug during assembly and not in my gears.
Mr personality (The service manager) said the assembler must have had a bad day that day and it fell in the tranny during assembly.
After the treatment I recieved from him today, were going to have a few words together face to face in the near future.
Smitty
Banned
Joined: May 2005
Posts: 14,496
Likes: 156
From:
RE: Security System Help Needed
Smitty/Joe
This should get you going again, It's in the DIY forum under electric topics. Had you posted this in the tech section, you'd be out riding now
Found it here by accident.
[IMG]local://upfiles/2318/C391ACB80E404232B949BC7265822127.jpg[/IMG]
This should get you going again, It's in the DIY forum under electric topics. Had you posted this in the tech section, you'd be out riding now
Found it here by accident.[IMG]local://upfiles/2318/C391ACB80E404232B949BC7265822127.jpg[/IMG]
Thread Starter
|
Road Captain
Joined: Aug 2005
Posts: 518
Likes: 27
From: PA
RE: Security System Help Needed
Thanks TCSTD.
I searched every possible name except the word marrying. I still need to order my service manual for the new bike. My other one went with the old bike.
It didn't hold up my riding though, I was working on my PC Map (Nasty Decel Pop).
I guess what puzzled me was my 03 was Carb not ECU. I don't remember doing this procedure back then.
Sorry about the rant, but my Service manager feels that they should do everything all the way down to putting on a Chrome Hot Topper.
For the money I spend there, He could have easily pointed out the procedure.
Smitty
I searched every possible name except the word marrying. I still need to order my service manual for the new bike. My other one went with the old bike.
It didn't hold up my riding though, I was working on my PC Map (Nasty Decel Pop).
I guess what puzzled me was my 03 was Carb not ECU. I don't remember doing this procedure back then.
Sorry about the rant, but my Service manager feels that they should do everything all the way down to putting on a Chrome Hot Topper.
For the money I spend there, He could have easily pointed out the procedure.
Smitty
Banned
Joined: May 2005
Posts: 14,496
Likes: 156
From:
RE: Security System Help Needed
Take a look around here, you'll find some usefull info https://www.hdforums.com/forumid_241/tt.htm
Thread
Thread Starter
Forum
Replies
Last Post
