When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok, so I got a little carried away thinking the weather was conducive to riding to work. Got all my gear on and about a mile away I realized I had my summer gloves on by accident. I meant to put on my warmer leather gloves that feel a bit similar on the hand.
Well, riding in wasnt so bad but I know that tonight when I leave at 8pm its going to go down into the 40's and these gloves just wont be warm enough. Its a 35-40 minute ride home with mostly highway speeds at 65mph.
What can I do to insulate my hands better for the ride home? Looking for some tricks from the pros here.
See if you can buy heavier gloves before you go home? Seriously, man, I don't know - I've been stuck on night rides with light gloves and it sucks. Any outdoor stores nearby that maybe sell some chemical heat packs?
PS - I think my brother-in-law just bought a black TT or TTS from you guys...
See if you can buy heavier gloves before you go home? Seriously, man, I don't know - I've been stuck on night rides with light gloves and it sucks. Any outdoor stores nearby that maybe sell some chemical heat packs?
PS - I think my brother-in-law just bought a black TT or TTS from you guys...
Yeah, no motorcycle stores/shops around me. Plus, Id hate to buy another pair of gloves just for the ride home when I already have 5 pairs for every season.
Hit a Lowes or Home Depot and pick up a pair of welders gloves. Believe it or not, a couple of us here at work have been wearing them for a while now for our 30+ minute highway rides back and forth to work. When it is down in the 20's, a few guys double up and wear summer gloves under the welders gloves.
Hit a Lowes or Home Depot and pick up a pair of welders gloves. Believe it or not, a couple of us here at work have been wearing them for a while now for our 30+ minute highway rides back and forth to work. When it is down in the 20's, a few guys double up and wear summer gloves under the welders gloves.
Interesting idea. I cant imagine they are expensive.
A fairly heavy duty plastic bag cuts the wind, makes a difference, might give you a few more minutes to frostbite. In my younger days, several times got into weather I didn't have clothes for, had to get creative when there weren't any stores conveniently located on my route, had to use whatever I could find along the road. Newspapers under the jacket are great, but something for the hands is a problem, plastic bags were all I could manage without a store with gloves. Hit a stretch of below freezing and light snow on a long trip once, gloves just weren't up to it, and got real lucky - went right by a snowmobile dealer, got some great mitts there. Bit expensive, but preventing hours with numb hands was worth it. Those gloves are over 35 years old, and I still use them occasionally.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.