Torque value

Closed Thread Subscribe

Thread Tools

Search this Thread

May 10, 2007 | 08:35 AM

Caston

Thread Starter

Advanced

Joined: Sep 2005

Posts: 87

Likes: 0

From:

Torque value

Does anybody know the correct torque value for the 27 torq screw on the derby cover. I just tightened them down and was going to finish torquing them today, but forgot to look in my manual before I left the house this morning to see the value.
Okay, so I'm an idiot. That being said, I know where to get the info.

Thanks for the help.

Caston

May 10, 2007 | 09:10 AM

djkolp

Road Captain

Joined: Oct 2006

Posts: 658

Likes: 23

From: South Florida

RE: Torque value

Quote:

ORIGINAL: Caston

Does anybody know the correct torque value for the 27 torq screw on the derby cover. I just tightened them down and was going to finish torquing them today, but forgot to look in my manual before I left the house this morning to see the value.
Okay, so I'm an idiot. That being said, I know where to get the info.

Thanks for the help.

Caston

My '07' FLSTCspecs are84-108 In lbs (9.5-12.2 Nm) Screws should be alternately tightened.

DJK

May 10, 2007 | 09:20 AM

Arizona

Ultimate HDF Member

Joined: Dec 2006

Posts: 5,878

Likes: 17

From: The Desert SouthWest

RE: Torque value

They don't have to be really tight, but as mentioned the main thing is following that alternate pattern as you go round the derby cover. Just "snug" is how I did mine and no problems at all.