When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I rode a '52 FL Pan for 8 years, I've never heard of that model either. As previously stated, the 'VIN" number was on the left side of the motor case. Mine was 52FL1624. Much shorter version than the 17 digit vins now. I'd would love to SEE a pic of that bike close up and the engine case. Something just isn't kosher here
If you look at the VIN, the first two digits will be the year. The next 2-4 digits will be the model number. RDFT doesn't sound like a model I've ever heard of.
The value of the bike will be very dependent on it's overall condition, how original it is, odometer reading, etc. If the bike is in good condition and runs well, $10K doesn't seem bad. If it runs and is in good shape, I think $6K is too low.
Value will also depend on exactly WHAT it is. Values are very different a Panhead big twin versus a 45" small twin, versus the little 125cc two-stroke single Harley began building in '48 from captured DKW blueprints.
I highly suspect this will turn out to be the latter.
Last edited by Uncle G.; Aug 25, 2016 at 07:24 AM.
The 1941 WRTT was the 1st HD built soley for Class C racing. The WRTT was used in road races or TT (motocross) events. The companion WR without brakes was used for flat-track racing.
Think they had something like a 10-year run. But even with that the title would only state the last two digits of the year, followed by WR and then the VIN#. The "TT" does not appear on the title.
Here is a photobucket link the bike is in storage because I live in a high theft area. http://s1099.photobucket.com/user/marissajustice1/media/Mobile%20Uploads/20160824_192439.jpg.html
It's a good looking bike but looks like it is far from original. I wouldn't know where to begin as to assessing its value. When a bike or car has been modified, restored, etc. the pricing guides aren't a lot of help.
A look on eBay and Craigslist and prices are all over the map. Beauty is in the eye of the beholder. If it starts and runs well I would think that somewhere between $6K and $10K seems reasonable. I like the springer front end!
Hopefully those with the knowledge will give you some guidance.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.