Something to ponder

Reply Subscribe

Thread Tools

Search this Thread

Sep 13, 2017 | 06:04 PM

#11

Tarkus60

Road Warrior

Joined: Apr 2016

Posts: 1,399

Likes: 307

From: Salem IN

So...where are the Terry Vance pit guys????

Sep 14, 2017 | 09:46 AM

#12

Coastal CVO

Thread Starter

Outstanding HDF Member

Joined: Apr 2013

Posts: 3,369

Likes: 472

From: CC TX

Quote:

Originally Posted by Buelligan666

If you have the manual, read it.

Are you assuming that I have not...

Read the post, if you are not interested in joining the conversation, move along.

This was an attempt to get people to talk about bikes and how we work differently on them, as opposed to some of the dribble that usually takes place here.

Sep 14, 2017 | 05:27 PM

#13

Buelligan666

Grand HDF Member

Joined: Aug 2014

Posts: 3,612

Likes: 1,606

From: Eastern Ohio

Quote:

Originally Posted by Coastal CVO

You said you have the manual, then asked a question about a procedure clearly defined in said manual. If I was too assume anything, it would be you just wanted to start a thread for the sake of starting a thread. So, I'll post a picture of what the manual states, so you can re-read it.

Torque the axle nut first, then push and hold the fork slider while tightening the axle holder nuts. Don't over tighten those, the studs break easily. 132-180 INCH POUNDS