When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I use Woolite, hand detergent for delicate fabrics. Fill sink with warm water, add a capfull of Woolite. Throw your liner pieces in and "squish" them around. You will be surprised how dirty the water gets. Repeat until water doesn't get dirty, then rinse. After parts are dry, re-install and enjoy the fresh Woolite smell!
I use a Doo Rag or something similar as a helmet liner. It serves two purposes. One to help keep my hair from beating me to death. Even one loose one can be a pain in the eyeball. Or ever swallow a long hair or get one up your nose? Not fun. Once I remove my helmet, the Doo Rag stays on my head so I can go about my business.
It also makes it so the liner of the helmet stays clean a lot longer. I do launder the Doo Rag after several rides, and I have maybe a half dozen to alternate with.
I have one convertible helmet with removable liners, and 4 others that don't. One is a 1/2 helmet, and the other 3 are 3/4 helmets (with pull down face shields) They all get a good cleaning at least once a year with woolite.
I use Woolite, hand detergent for delicate fabrics. Fill sink with warm water, add a capfull of Woolite. Throw your liner pieces in and "squish" them around. You will be surprised how dirty the water gets. Repeat until water doesn't get dirty, then rinse. After parts are dry, re-install and enjoy the fresh Woolite smell!
Once you do this, unlikely you will go without washing your helmet again
I spray OdoBan in my helmets with permanent liners after every ride, Use woolite on the removable parts.. Always clean the face shields before every ride..
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.