please help
Thread Starter
|
Stage II
Joined: Apr 2019
Posts: 2
Likes: 0
From: michigan
please help
Im new to the forum and need help I ride a 96 evo chopper with a open primary I had to pull my clutch basket off tonight to change my main drive belt I forgot to loosen the clutch cable adjuster and just pulled the adjuster screw out of the basket when I reinstalled all my parts and reset the clutch basket adjuster screw to where it was prior I now have no clutch my lever is just dangling on my bars any help on fixing this would be greatly appreciated
Thread Starter
|
Stage II
Joined: Apr 2019
Posts: 2
Likes: 0
From: michigan
I could see having to mess with that if I had loosened my cable (cable end possibly slip out) but all the research Ive done so far makes everything on that side look c clipped in place I had no problems with my clutch prior to this I feel like im missing something so simple that im going to slap myself when I figure it out
Grand HDF Member
Joined: Apr 2014
Posts: 3,790
Likes: 3,768
From: Monticello, Florida
I could see having to mess with that if I had loosened my cable (cable end possibly slip out) but all the research Ive done so far makes everything on that side look c clipped in place I had no problems with my clutch prior to this I feel like im missing something so simple that im going to slap myself when I figure it out
P.S., get a service manual so you know what to look for and what to do.
Last edited by Pothole914; Apr 21, 2019 at 04:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jgcable
Primary/Transmission/Driveline/Clutch
2
Oct 22, 2007 01:19 PM
