Paint Guns
#1
Paint Guns
Since we don't have a painting section I am posting here.
Does anyone have a recomendation on a small paint gun for spraying small parts likeTanks andFenders?
Somethingforcolor and clear coats.
Before any one starts ragging on me saying I should'nt try this I used to work as a painter but that was some 20 years ago.
Does anyone have a recomendation on a small paint gun for spraying small parts likeTanks andFenders?
Somethingforcolor and clear coats.
Before any one starts ragging on me saying I should'nt try this I used to work as a painter but that was some 20 years ago.
#2
RE: Paint Guns
being that you and I both come from the same time frame for painting
you can never go wrong with a binks gun
but then if you just want a cheap gun to get the job done go Chicago at Harborfreight
you can never go wrong with a binks gun
but then if you just want a cheap gun to get the job done go Chicago at Harborfreight
#3
RE: Paint Guns
ORIGINAL: Crushertx3
being that you and I both come from the same time frame for painting
you can never go wrong with a binks gun
but then if you just want a cheap gun to get the job done go Chicago at Harborfreight
being that you and I both come from the same time frame for painting
you can never go wrong with a binks gun
but then if you just want a cheap gun to get the job done go Chicago at Harborfreight
#4
RE: Paint Guns
most of the mid priced mini HVLP guns work well today.
They atomize well and can produce a good spray pattern from pencil to 6-8 inches of fan. We use Sharpe's in our shop if that helps.
They atomize well and can produce a good spray pattern from pencil to 6-8 inches of fan. We use Sharpe's in our shop if that helps.
#6
RE: Paint Guns
Thanks for the responses!
I think I used mostly Binks guns but not finding a good price online or a dealer near me.
I know I bought a cheap gun some years back and after a couple uses it was shot.
Yes, the Sharpe's have a good reputation, decent price and repair parts are available.
Now anyonehave a recomendation for a good quality paint and clear coat?
I think I used mostly Binks guns but not finding a good price online or a dealer near me.
I know I bought a cheap gun some years back and after a couple uses it was shot.
Yes, the Sharpe's have a good reputation, decent price and repair parts are available.
Now anyonehave a recomendation for a good quality paint and clear coat?
Thread
Thread Starter
Forum
Replies
Last Post