When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
the hard way. Going home last night I heard a strange noise under my bike then all hell broke loose. I broke off four of the five bolts holding the pully to the rear wheel. I had put on new rims a couple of months ago and put the permanent sealent on the bolts, but they still worked free. Moral of the story, when you put new rims on, you should still go back after a few hundred miles and recheck the fit. I didn't do alot of damage, but I certainly could have.
One of the riders on our recent Forums ride had the same problem with his custom wheel and chrome sprocket. We worked on it at my house before the ride, and then he had to work on it again before he finished the ride.
One of the riders on our recent Forums ride had the same problem with his custom wheel and chrome sprocket. We worked on it at my house before the ride, and then he had to work on it again before he finished the ride.
I think the chrome is too slick for the loctite to get a hold of. I think the threads should be chased with a tap, and the bolts should not be chromed. JMO
Damn,,,,,,,,,could have been way worse.
Is the new rear rim damaged?
Nope, but I thought it was at first. The hub took a little grinding, but the rim didn't get a scratch.
Lynn
I'm sure you'll be checking those bolts quite regularly from now on.
I'll bet your heart was pumping a mile a minute when that first happened.
A few years ago while riding with some friends.One guy just had PMI rims & brake calipers(just got them).Well on the highway he applied the brakes & the rear caliper broke off & followed the rear disc right into the rear fender & came to a very loud & scary halt.I wasn't even on the bike & it scared the hell outta me,so I wasn't surprised to see his hands shaking when he went to light a cig.
I think the chrome is too slick for the loctite to get a hold of. I think the threads should be chased with a tap, and the bolts should not be chromed. JMO
I agree. I went and bought new ones that are not chromed. Now I need some touch up paint for the swingarm. It got alittle beat up.
Lynn
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.