2013 breakout baffle issue
Thread Starter
|
2nd Gear
Joined: Jul 2021
Posts: 6
Likes: 0
From: Ky
2013 breakout baffle issue
I have 2013 breakout with curved v & h pipes the bottom baffle came right out with no problems the top one won't budge after wd 40. Will it hurt it to ride it the 40 to 60 miles to the shop to have them get the second baffle out? The bottom one was a pain to get screw out of it so can only imagine trying to get baffle and screw back in. What's best way to get the to baffle out?
Stellar HDF Member
Joined: May 2007
Posts: 3,256
Likes: 522
From: USA
Two cent comment.
A slide hammer with claws, will that work?
Might not cause any damage driving 60 miles with one pipe baffled and the other not.
I prefer the exhaust system removal suggestion.
Good luck.
A slide hammer with claws, will that work?
Might not cause any damage driving 60 miles with one pipe baffled and the other not.
I prefer the exhaust system removal suggestion.
Good luck.
Thread Starter
|
2nd Gear
Joined: Jul 2021
Posts: 6
Likes: 0
From: Ky
Put the 2 ND baffle back in temporarily until I can get ahold of a slide hammer or can get it into a shop. Will I'm to get it saturday when I have time to work on it without getting in a hurry.
Thread
Thread Starter
Forum
Replies
Last Post
patharley
Softail Models
0
Apr 26, 2014 11:08 AM
