Cam work
Club Member
Joined: May 2007
Posts: 145,895
Likes: 821
From: 40 miles Northeast of Indy..
this past spring at one HD dealer up north, I had the 26h's installed with new lifters, plus the dyno tune was free as it was added into the winter special package.
So the cam install with all new bearings and free dyno, winter deal $725. plus tax.
New lifters where $27 @ so add $108 more.
Total $833 plus tax $58.31.
Already had the SERT and SE A/C-K&N, pipes....
So the cam install with all new bearings and free dyno, winter deal $725. plus tax.
New lifters where $27 @ so add $108 more.
Total $833 plus tax $58.31.
Already had the SERT and SE A/C-K&N, pipes....
Works with stock heads and springs.
Ultimate HDF Member
Joined: Sep 2005
Posts: 8,641
Likes: 26
From: Ozark Country
95", Screamin' Eagle 258 cam package (569/569 lift, 258/258 duration) which requires springs and adjustable pushrods, worked heads, forged 10.25:1 pistons, K&N Hi-Flow intake with optimized Mikuni HSR 42, etc...
More horsepower than I will ever need, runs fine on 92 octane, and is completely dependable and requires no more maintenance than stock..
More horsepower than I will ever need, runs fine on 92 octane, and is completely dependable and requires no more maintenance than stock..
Thread
Thread Starter
Forum
Replies
Last Post
