Belt pulley modification set-back
Thread Starter
|
Cruiser
Joined: Oct 2009
Posts: 135
Likes: 11
From: South Carolina
Belt pulley modification set-back
Hi all,
I got the Andrews 30 tooth pulley, SE compensator and HD clutch spring to swap out with stock parts. Didn't take long to break down and in the primary...I was making great timing and yep it was too good to be true.
Long story short, I was using my 40" breaker bar on the 32 tooth belt pulley to break it loose when my snap-on 3/4" female to 1/2" male adapter completely sheered off in the georges garage style socket. I guess I shouldn't be surprised as anything can break but darn I thought snap-on was as close to invincible as you can get. Anybody live in the Dayton, OH area that can lend me a 600+ ft/lb torque wrench or an adapter that won't sheer off?
John
I got the Andrews 30 tooth pulley, SE compensator and HD clutch spring to swap out with stock parts. Didn't take long to break down and in the primary...I was making great timing and yep it was too good to be true.
Long story short, I was using my 40" breaker bar on the 32 tooth belt pulley to break it loose when my snap-on 3/4" female to 1/2" male adapter completely sheered off in the georges garage style socket. I guess I shouldn't be surprised as anything can break but darn I thought snap-on was as close to invincible as you can get. Anybody live in the Dayton, OH area that can lend me a 600+ ft/lb torque wrench or an adapter that won't sheer off?
John
Thread
Thread Starter
Forum
Replies
Last Post
