how many miles on.....
Thread Starter
|
Advanced
Joined: May 2010
Posts: 58
Likes: 0
From: Antioch,Ca
how many miles on.....
Your modded/high performance/built motor ? Not talking about bolt on stuff here but big bore , fully built motors ! Basically tryin to get a feel of reliability. So please share your mods and/or build up details and be as specific as possible
Thanks.
Rich
Thanks.
Rich
Road Warrior
Joined: Jul 2008
Posts: 1,426
Likes: 90
From: People's Republik of Kalifornia
I have a 103 conversion with a better clutch. Not a SE conversion, it has tuned and polished heads, pushrods, valves etc., along with the air cleaner and pipes. Well over 8000 miles so far after a year. No problems.
The people that did it have been in business for over 25 years, and have a lot of practical experience in drag racing. I asked about a bigger conversion, but was discouraged due to reliability issues. My 103 puts out a bit more hp and torque than the stock HD 110 motor, I think. Dyno numbers at the rear wheel are hp=104 torque=107.
I think that if one wants more power than this, it would put too much strain on the stock transmission, drive train etc.
Since I own a Softail model, I'm not really powering too much around curves due to handling limitations. But I have plenty of passing power when needed.
I note that you are in CA. PM me if you want to know who did my conversion.
The people that did it have been in business for over 25 years, and have a lot of practical experience in drag racing. I asked about a bigger conversion, but was discouraged due to reliability issues. My 103 puts out a bit more hp and torque than the stock HD 110 motor, I think. Dyno numbers at the rear wheel are hp=104 torque=107.
I think that if one wants more power than this, it would put too much strain on the stock transmission, drive train etc.
Since I own a Softail model, I'm not really powering too much around curves due to handling limitations. But I have plenty of passing power when needed.
I note that you are in CA. PM me if you want to know who did my conversion.
Thread
Thread Starter
Forum
Replies
Last Post
