Odometer gone?
Thread Starter
|
Seasoned HDF Member
Joined: Apr 2008
Posts: 23,053
Likes: 12,327
From: Arkansas
Odometer gone?
My bike is in the shop (has been for a while). Stopped by last week to see what was happening with it and the tech asked me ......."did your odometer work when you dropped this off"? I answered it did and asked what he was talking about. He said that when he hooked it back up and turned on the ignition the Odometer didn't come on, said he had to push the trip button to get it to light up (I hate all the electrical **** on the new bikes) and wanted to know if it was always that way.
I told him it worked fine when I dropped it off. Anyone know what might have caused that? He had to remove the tank for some of the work and I told him to install a 2" lift when he put it back together, don't know if he had to lengthen any wires to do that or not.
They are closed today and I haven't talked to him since I saw him last week. Just thought I'd pick some brains here in case he hasn't been able to figure it out on his own.
Thanks.
I told him it worked fine when I dropped it off. Anyone know what might have caused that? He had to remove the tank for some of the work and I told him to install a 2" lift when he put it back together, don't know if he had to lengthen any wires to do that or not.
They are closed today and I haven't talked to him since I saw him last week. Just thought I'd pick some brains here in case he hasn't been able to figure it out on his own.
Thanks.
Road Master
Joined: Nov 2010
Posts: 1,115
Likes: 69
From: Bay Area, NorCal
I've noticed a couple of times when performing mods or a repair the "state-of-the-art" electronics on my bike will act a little squirrelly when all power has been cut off, such as a wiring harness or battery disconnect, but that all functions are restored after an ignition/motor turn on - kind of like a computer that needs to "reboot" after a power failure.
After you get your bike back from the shop see if you have to keep actuating the trip reset button to get your odo working; if so, then the shop needs to recheck its work to find the fault. Hope it works out.
~
After you get your bike back from the shop see if you have to keep actuating the trip reset button to get your odo working; if so, then the shop needs to recheck its work to find the fault. Hope it works out.
~
Extreme HDF Member
Joined: Dec 2007
Posts: 13,402
Likes: 941
From: Illinois
Oh no! Time is getting short. Get them on the ball quick!
I'll be doing a 2" lift on my Softail this winter. They look sharp. But, I have heard that it reduces the amount of reserve that can be used.
I'll be doing a 2" lift on my Softail this winter. They look sharp. But, I have heard that it reduces the amount of reserve that can be used.
Thread
Thread Starter
Forum
Replies
Last Post
HarleyDFourtyHate
Sportster Models
7
Oct 12, 2021 05:13 AM
