Custom Derby Cover help
Thread Starter
|
Road Master
Joined: Jun 2011
Posts: 756
Likes: 1
From: Austin, TX
Thread Starter
|
Road Master
Joined: Jun 2011
Posts: 756
Likes: 1
From: Austin, TX
thanks for all the links that have been posted. I'll go through them and get this project going...
Seasoned HDF Member
Joined: Sep 2009
Posts: 17,145
Likes: 6,166
From: SE Michigan
Seasoned HDF Member
Joined: Jun 2007
Posts: 5,763
Likes: 371
From: North of Hell, South of Heaven
CAT, LLC did mine. $175 for the derby, $75 points cover. Sorry, no pic, but they did an awesome job.
http://www.billetcats.com/
http://www.billetcats.com/
Road Warrior
Joined: Nov 2009
Posts: 1,635
Likes: 13
From: 501
I just recently picked up my SYF derby cover. The artist has passed, but his wife said she still had a few. She also said she would try to satisfy any future requests for them as well. Ck here: http://www.pangal.com/bike_parts/sto...ock_parts.html
Other than that I think Mountain Machine might be the winning ticket for the 3-D design. Have the roses powder coated as recommended, or hire an out of work hippy chick to hand paint them for you. I would most likely go for the hippy chick!
My $0.02
aka Bob
Other than that I think Mountain Machine might be the winning ticket for the 3-D design. Have the roses powder coated as recommended, or hire an out of work hippy chick to hand paint them for you. I would most likely go for the hippy chick!
My $0.02
aka Bob
Stage I
Joined: Oct 2012
Posts: 1
Likes: 0
From: New Hampshire
Derby Cover
Sorry I haven't been able to reply for some reason. One of your friends on the site contacted me to see if I can help you. I hope I am replying in the correct way.
We ave our Derby covers powder coated before our process, but it is with a different chemical for the gas infused image. WE could not separate out the finishes on the cover. We put the image on the cover and some airbrushing, but mostly the image. I hope this helps. My email is chryle@gmx.com. But I also received a message when you posted.
Sincerely,
Cheryle
We ave our Derby covers powder coated before our process, but it is with a different chemical for the gas infused image. WE could not separate out the finishes on the cover. We put the image on the cover and some airbrushing, but mostly the image. I hope this helps. My email is chryle@gmx.com. But I also received a message when you posted.
Sincerely,
Cheryle
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Banned
Joined: Sep 2008
Posts: 669
Likes: 1
From: Scottsdale, Arizona
I am looking to get a custom derby cover made with the attached image. I have seen some awesome firemen badges of great quality, some photos printed on from Venom imaging, and custom etchers.
I am looking to match, or at least get close enough for it to look good, the orange roses to my HD orange moto.
I think I have a starting place, but any advice might get me going.
Thanks in advance...
I am looking to match, or at least get close enough for it to look good, the orange roses to my HD orange moto.
I think I have a starting place, but any advice might get me going.
Thanks in advance...
https://www.hdforums.com/forum/touri...gs-by-pig.html
Thread Starter
|
Road Master
Joined: Jun 2011
Posts: 756
Likes: 1
From: Austin, TX
Take a look at this thread. Looks like they do some awesome work.
https://www.hdforums.com/forum/touri...gs-by-pig.html
https://www.hdforums.com/forum/touri...gs-by-pig.html
thanks for the link.