POWER COMMANDER ISSUES
Thread Starter
|
Road Captain
Joined: Nov 2006
Posts: 555
Likes: 0
POWER COMMANDER ISSUES
For those of you considering the PCIII as an EFI mapping system, I suggest you read the thread "At a loss with PC3" in our Tech Forum- subcategory..Electrical / Tuner / ECM...
This is a four page thread witha lot of good feedback on a reoccuring and potentially dangerous problem with PCIII...
SERT here I come.
This is a four page thread witha lot of good feedback on a reoccuring and potentially dangerous problem with PCIII...
SERT here I come.
Road Master
Joined: Oct 2006
Posts: 812
Likes: 0
From: Alta Loma, CA
RE: POWER COMMANDER ISSUES
Here is a link to the thread to make it easier:
https://www.hdforums.com/m_1248556/tm.htm
Note: This problem seems to only pertain to 07' models with the 96" engine
https://www.hdforums.com/m_1248556/tm.htm
Note: This problem seems to only pertain to 07' models with the 96" engine
Ultimate HDF Member
Joined: Nov 2005
Posts: 5,256
Likes: 5
From: Concord, CA
RE: POWER COMMANDER ISSUES
OK, so there are a few people with issues, but tons of people without.
I'm not making light of the issue, I'm just saying that statistically very few people have a problem.
I'm not making light of the issue, I'm just saying that statistically very few people have a problem.
Road Warrior
Joined: Sep 2006
Posts: 1,290
Likes: 0
From:
Thread
Thread Starter
Forum
Replies
Last Post
