Kuryakyn LED Tail lights.
Thread Starter
|
Stage II
Joined: Mar 2014
Posts: 2
Likes: 0
From: New York
Kuryakyn LED Tail lights.
I posted this in the new member forum as well, maybe get a little more "airtime" here too. Thanks!!
Hi all, been lurking around this forum on and off for a few years now. Decided to jump into the fray. A bit of background, I have a 2008 Rocker C that I've had for about 4 years now. Was a dirt bike guy prior to that, but really love getting out on the roads as it's easier on these aging bones. Live in upstate NY where ride seasons are short, but there's some beautiful scenery....
Now for my question... I have a dear friend that wrecked her 2007 XL883L last summer. We have been painstakingly putting her back together, beautiful new paint scheme being completed and the finishing touches being done.
She has the bobbed rear fender and had the Kuryakyn intergrated tail light/turn signals on it. (Part # 4887) They no longer make them, but I have found them available online at other resources. Does the 4887 ALREADY include the turn signals, or is there an additional part that needs to be purchased? I still have the actual LED portion of the tail light, however the lense and casing didn't fare as well. I'm not looking to even use that part if I can readily purchase the whole unit, but I am getting so much conflicting information that I'm stumped. Any help that any of you can provide would be much appreciated!
Look forward to participating more and sharing some photos of what's going to be a beautiful bike once she's finished! TYIA!
Hi all, been lurking around this forum on and off for a few years now. Decided to jump into the fray. A bit of background, I have a 2008 Rocker C that I've had for about 4 years now. Was a dirt bike guy prior to that, but really love getting out on the roads as it's easier on these aging bones. Live in upstate NY where ride seasons are short, but there's some beautiful scenery....
Now for my question... I have a dear friend that wrecked her 2007 XL883L last summer. We have been painstakingly putting her back together, beautiful new paint scheme being completed and the finishing touches being done.
She has the bobbed rear fender and had the Kuryakyn intergrated tail light/turn signals on it. (Part # 4887) They no longer make them, but I have found them available online at other resources. Does the 4887 ALREADY include the turn signals, or is there an additional part that needs to be purchased? I still have the actual LED portion of the tail light, however the lense and casing didn't fare as well. I'm not looking to even use that part if I can readily purchase the whole unit, but I am getting so much conflicting information that I'm stumped. Any help that any of you can provide would be much appreciated!
Look forward to participating more and sharing some photos of what's going to be a beautiful bike once she's finished! TYIA!
Road Master
Joined: Jul 2013
Posts: 1,081
Likes: 2
From: Cali
can you clarify what your looking for.
are you looking for a tail light or a set of turns that can function as brakes or both.
from what i can tell the 4887 kit is just the tail light.
if your looking for a good tail light. i'd recommend the customdynamics or brightasslight versions instead. the dealer near my carried the kury lights and my custom dynamics is far brighter.
are you looking for a tail light or a set of turns that can function as brakes or both.
from what i can tell the 4887 kit is just the tail light.
if your looking for a good tail light. i'd recommend the customdynamics or brightasslight versions instead. the dealer near my carried the kury lights and my custom dynamics is far brighter.
Last edited by slozomby; Mar 13, 2014 at 07:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post
06flstf
Softail Models
4
May 16, 2008 10:24 AM
