1' drag t bars
Thread Starter
|
Cruiser
Joined: Jul 2015
Posts: 151
Likes: 19
From: New York, NY
1' drag t bars
Hello everyone. I have an 06 Low Rider and i want to change out the stock bars and risers for a T Bar. I am having a hard time finding the one that I want and I know it exists... I am looking for T Bar with zero pullback and a rise between 4" and 8" max in a chrome finish. They need to be dimpled too for the stock controls. I know I will lose the top clamp with the instrument lights, but there are ways around that. I have seen some, but they are all black or raw or the risers have a pullback to them. iIf the risers are straight, then the bars have the pullback. I have time on my side, so any info whenever will be greatly appreciated.
Gracias.
Gracias.
Last edited by DG422; Oct 7, 2015 at 10:46 AM.
Seasoned HDF Member
Joined: Jan 2005
Posts: 68,021
Likes: 3,276
From:
It's been awhile since I looked or bought any bars from these people but they used to have a great selection and good customer support, www.wild1inc.com. They also had pics of various bars on bikes to see how they looked, maybe they still might, good luck.
Thread Starter
|
Cruiser
Joined: Jul 2015
Posts: 151
Likes: 19
From: New York, NY
thanks Springer, I did check them out and I looked again to be sure. They have the T Bars, but all have some sort of pullback. the goal is to have something similar to a broomstick drag bar but with the built in risers in chrome. I found something on the LA Choppers site and am waiting for them to get back to me regarding compatability with an 06 Low Rider.
Thread
Thread Starter
Forum
Replies
Last Post
