TCMT tour pak - Harley Davidson Forums



General Topics/Tech Tips Discussion on break in periods, rider comfort, seats and pad suggestions. Tech tips as they become available will be posted here.

TCMT tour pak

Reply
 
 
 
P
 
Thread Tools Search this Thread
  #1  
Old 02-10-2018, 01:12 AM
JustinC13A's Avatar
JustinC13A JustinC13A is offline
New Member
Thread Starter
Join Date: Jan 2017
Location: Texas
Posts: 37
Thanked 6 Times in 5 Posts
Default TCMT tour pak

I wanted to leave a review about this specific product because I could not find ANYTHING and took a chance on it. I have no affiliation or incentives from TCMT or any other company, this is just "gee whiz" information to anyone who might be shopping for the same product. Forgive the pictures, it is after midnight and I am in my underpants.

I did a bunch of research on Advan Black, Harley OEM and TCMT. All I was really able to find out is everyone who buys OEM thinks the Chinese stuff is garage and the people who buy Chinese stuff think OEM is too expensive.

Anyway, I took the plunge and bought a TCMT chopped tour pak off of ebay. I ended up buying the TCMT tour pak because I bought a cheap luggage rack last year from TCMT and it has held up well. It is a solid piece and did not live up to the bad mouthing I heard about it.

I opted for the metal base plate also after reading about its effectiveness in distributing weight evenly to prevent flexing. All in I think I have $390 into this.

TCMT offers a lot of options and packages, I chose the one that came with the chopped tour pak, mounting base and luggage rack. I have no intention of using the luggage rack but it came with it.

First impression when opening the box was it looked good! Everything was wrapped in bubble wrap to prevent damage. When I removed everything it looked pretty nice. The lock and hinges were already installed which was nice. I read that the hardware it comes with is cheap and should be replaced but I have not yet seen a reason to mess with it. But that is after playing with it for a little while and one ride for about 125 miles.

The only thing I noticed that I did not like right off the bat is a little dimple dead center on the top of the lid. It is noticeable but not a deal breaker to me.

I took it all into the garage and started with the drilling. The base, metal base plate and quick detach mount holes all lined up perfectly. I used a small drill bit and gradually increased in size until the screws made it all the way through. I put the locking nuts on loosely and mounted it on my Road Glide. I added some blue loctite, as suggested by one of the reviews I was able to find, and tightened up the lock nuts with a 10mm wrench. I might add some rubber washers between the mount and the tour pak but it might not be necessary. I chose not to install the back rest and luggage rack on the top purely for cosmetic reasons.

I got everything tightened up and it looks pretty good! The vivid black matches my bikes black, there are no apparent swirls or scratches in the paint and it all came together very easily. Standing back and eyeballing it, I was worried that my saddlebags would not have enough clearance to open. To my relief they both fully open without touching the tour pak. Although a little bit of access is lost on the back side of the saddlebags.

I rode about 75% highway and 25% around town for a little while. The roads in my city absolutely SUCK so the tour pak got jostled around plenty. It held in place fine but it does have some wiggle room on the quick detach mounting points. There might be some adjustability there but I have not looked closely at it yet. Even if it is already as good as it can get, it is fine in my opinion. The only time I notice the movement is when I hit a bump and it rattles a little. With luggage in the tour pak it likely will not rattle too much.

All in all, it was very simple to set up and install that I am happy with. I will be putting it to the test in a few weeks when I ride from west Texas to Daytona Beach for Bike Week!

I am also glad I went with the chopped tour pak. It is sleek enough to leave on all the time and "look cool" but has enough room inside for a backpack or whatever else.

TL; DR I like the cheap chinese tour pak and would but it again.




Side view just showing the tour pak



Thanks crewchief25 for the black air cleaner!



Forgive the fingerprints





It blocks the saddlebag a little but there is still plenty of access.

Last edited by JustinC13A; 02-10-2018 at 01:13 AM.
Reply With Quote
The Following User Says Thank You to JustinC13A For This Useful Post:
sarge-glide (02-10-2018)
  #2  
Old 02-14-2018, 12:11 PM
JustinC13A's Avatar
JustinC13A JustinC13A is offline
New Member
Thread Starter
Join Date: Jan 2017
Location: Texas
Posts: 37
Thanked 6 Times in 5 Posts
Default

***UPDATE***
************************************************** *****

I put about 600 miles on my Road Glide this weekend with the tour pak on. It held up great! I put a one inch piece of double sided tape on the mounting hardware and it no longer rattles. I rode to the store and loaded it up with about 15 pounds worth of stuff and made it home without a hitch. I am thinking about adding a Custom Dynamics plasma rod onto the back for better visibility. I am glad I bought it and I would buy it again without hesitation.
Reply With Quote
  #3  
Old 02-17-2018, 08:45 PM
HDK's Avatar
HDK HDK is offline
One Of The Regulars
Join Date: Jul 2014
Location: West TN
Posts: 155
Thanked 2 Times in 2 Posts
Default

Looking at buying one of these kits myself because the only time I would use the pack is when riding two up which is rarely. Solo most of the time.
Were holes marked for drilling for the backrest pad and base? I know you said you didn't use the backrest but wanted to inquire about how difficult it would be to get this lined up and drilled correctly.

Thanks
Reply With Quote
The Following User Says Thank You to HDK For This Useful Post:
JustinC13A (02-17-2018)
  #4  
Old 02-17-2018, 09:40 PM
JustinC13A's Avatar
JustinC13A JustinC13A is offline
New Member
Thread Starter
Join Date: Jan 2017
Location: Texas
Posts: 37
Thanked 6 Times in 5 Posts
Default

There are 4 little indents on the base where you drill holes to mount it, so that part was super easy.

There are 3 screws on the back of the backrest and I do not see anything on the tour pak itself that looks like it will help line it up. The back rest is not predrilled.

Hang tight, I will try and get a pic...
Reply With Quote
  #5  
Old 02-17-2018, 09:48 PM
JustinC13A's Avatar
JustinC13A JustinC13A is offline
New Member
Thread Starter
Join Date: Jan 2017
Location: Texas
Posts: 37
Thanked 6 Times in 5 Posts
Default



There are 2 screws on top and one in the center on the bottom





The holes in the center are for the tether that keeps the lid from flopping open
Reply With Quote
The Following User Says Thank You to JustinC13A For This Useful Post:
HDK (02-18-2018)
  #6  
Old 02-18-2018, 02:36 PM
HDK's Avatar
HDK HDK is offline
One Of The Regulars
Join Date: Jul 2014
Location: West TN
Posts: 155
Thanked 2 Times in 2 Posts
Default

Thanks for the info. Helps with the decision. Hate that there is no guidance for that part. I plan to order the King tour pack with wrap around backrest because the only time it would be used would be a couple times a year for road trips the wife decided to join on. I still may try this one but may just bite the bullet and go with Advanblack too because I know it would all be right that way. Decisions!


Thanks,
Reply With Quote
 
 
 
P
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
TCMT aftermarket Tour Pak JOECAKRON New "Rushmore" Models 2 12-16-2017 03:25 PM
Premium Tour-Pak Luggage Rack Bag - 93300006 Bunker Touring Parts 1 09-26-2017 01:55 AM
AdvanBlack 2014+ Color-matched Rushmore Razor, Chopped and King Tour Pak will come with free inner metal plate now AdvanBlack Vendor For Sale Classifieds 2 06-23-2017 02:50 AM
Advanblack laser cut inner base plate For 2014+ Harley Rusmore Tour Pak AdvanBlack Vendor For Sale Classifieds 1 06-15-2017 02:51 AM
*AdvanBlack* Free inner metal plate now available for 2014+ Color-matched Rushmore Razor, Chopped and King Tour Pak NOW **** AdvanBlack Vendor For Sale Classifieds 0 05-15-2017 08:26 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Featured Sponsors
Vendor Directory

All times are GMT -5. The time now is 09:32 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: