Ride Planner
Thread Starter
|
Stage I
Joined: Jul 2018
Posts: 1
Likes: 0
From: Corinth, MS
Ride Planner
I've planned a 24 stop trip in Ride Planner. I needed to add a stop and of course it added it to the end. When I dragged it to its proper location, it REPLACED the point that was there and MOVED it to the end. I had to drag the replaced stop to it's proper place which in turn replaced the next stop and moved it to the end. Had to do this for each subsequent stop. Surely, I was doing something wrong. Ideas
Road Master
Joined: Apr 2018
Posts: 1,171
Likes: 709
From: Indianapolis
Nope. The interface is pretty kludgey. What's even worse is if you've added waypoints to force a certain route. Waypoints are good because of the way it works. It breaks trips into several point to points. If you're rolling down the twisties, you don't want to have to navigate the nav system to pick another destination.
The way I've found it works is you add all your actual destinations first. Then order them, then add the waypoints. If you have to add a destination, well, you just have to deal with the glitch.
The way I've found it works is you add all your actual destinations first. Then order them, then add the waypoints. If you have to add a destination, well, you just have to deal with the glitch.
Thread
Thread Starter
Forum
Replies
Last Post
