Handlebar risers
Thread Starter
|
Stage III
Joined: Nov 2020
Posts: 3
Likes: 0
From: Midlands
Handlebar risers
I recently purchased the following in the UK;
Handlebar Risers 4 1/2 " Pullback & clamp Fits Harley-Davidson 75 & Later 905765
and was wondering if someone could tell me what size bolts I need to fit them to the top yoke on my motorcycle please?
Motorcycle is not a Harley.
Many thanks.
Handlebar Risers 4 1/2 " Pullback & clamp Fits Harley-Davidson 75 & Later 905765
and was wondering if someone could tell me what size bolts I need to fit them to the top yoke on my motorcycle please?
Motorcycle is not a Harley.
Many thanks.
Road Master
Joined: Feb 2018
Posts: 1,197
Likes: 1,852
From: England
They're not an HD part, they're from Motorcycle Storehouse
https://www.motorcyclestorehouse.com/product/905765
They give the thread as 1/2" - 13, so you need 1/2" UNC bolts or hex head screws of whatever length you need to pass through the top yoke and screw into the risers. Plenty on ebay.
https://www.motorcyclestorehouse.com/product/905765
They give the thread as 1/2" - 13, so you need 1/2" UNC bolts or hex head screws of whatever length you need to pass through the top yoke and screw into the risers. Plenty on ebay.
Thank you
Thread
Thread Starter
Forum
Replies
Last Post
